The quality of our lures sets them apart from other similar products. Every Fountain Lure performs exactly as it is supposed to. You know you are fishing with the best when you choose our lures. Here's the part you can't see:

LEAD: just part of the process.  Inside each Fountain Trolling Lure is a perfectly shaped piece of lead. The "raw" product comes from discarded lead flashing. The pieces of lead are then melted down, the impurities  skimmed off, and the lead is then poured into molds. While we are required by law to label each lure regarding the lead contained, it is encased within the resin head and has no contact with the outside of the lure. The bigger the head the more lead we use.

 

BRASS TUBING:  Some of our trolling lures have jet heads while others have a single tube through which the fishing line is passed. Only high-quality brass is used in all of our lures. Each piece of tubing is hand cut depending on the size of the lure head. The ends of the brass tubing are then polished  to make sure that there will be no snag which can cut the line.

 

RESIN:  We use only the best resin when we pour it into a mold. It must be clean and clear. When the resin is dry it is taken from the mold and allowed to cure for about 5 days. It comes out of the mold in very rough condition. After it is dried it is cut into the exact shape  the finished lure will look like.

 

POLISHING: This is the tough part and a highly regarded secret. Polishing is extremely time consuming. Very few people can really polish a lure correctly. We invite you to  take a hand made lure from someone else and place it along side a Fountain Trolling Lure. Remember that the lure is used to attract fish, and they are a lot smarter in their habitat than you and I. Good, clean, long lines of flawless resin are a critical component of a lure that will attract fish through a combination of perfect appearance and performance - every time.